GPS Wireless Clock System Transmitters for Hospitals and Healthcare

Transmitter with GPS Receiver

If your hospital’s clocks can't keep the right time, how can your staff? Inaccurate clocks cause problems as staff try to synchronize medical appointments. Patients may not receive time-sensitive medication or check-ups at the right time. Computer clocks show a different time than wall clocks. You may also have more liabilities and disputes about insurance and patient bills involving time issues. Eliminate these problems and count on the most accurate, dependable timekeeping system in the world to keep your facility running smoothly.

Introducing the CommandPoint™ 72XR High Power Transmitter Series - the most powerful wireless integrated solution available for large facilities. The CommandPoint Series saves you time, money and the headaches of maintaining and integrating the clocks, bells and computer timing devices. As with all Primex Wireless products, the CommandPoint Series uses GPS satellites for the most accurate and reliable wireless synchronized system in the industry. The CommandPoint Series gives you maintenance-free, interference-free communication today. Best of all, you’ll be primed and ready to handle integration demands tomorrow!

CommandPoint

Item #

72XR5*

72XR30*

Description

5-Watt CommandPoint Transmitter

30-Watt CommandPoint Transmitter

*Includes GPS Receiver, Transmitter, Amplifier, and Antenna.

CommandPoint Specifications
System:
• Operating Frequency Range: 72-76 MHz
• Enclosure Dimensions: 20.8”W x 17.6”H x 21.4”D
• Approx. Weight: 75 lbs.
• Power Supply Requirements:
– 120 VAC, 50/60 Hz

• Operating Temperature Range: 32°-122°F (0°-50°C)
• Cabling: 100’ between amplifier and antenna
• FCC Part 90 Accepted
• Oversized heat sink provides adequate cooling

Amplifier:
• Output Bandwidth: 20 MHz maximum
• Connector at Antenna: N-male

Ground Plane Antenna:
• Dimensions: 5.08’L x 8.67’W x 8.67’D
• Lightning Protection: Direct Ground
• Pole or Wall Mountable

GPS Receiver:
• 15’cable (50-, 100-, 150-, and 200-foot extensions available)
• Mounting bracket and hardware included for rooftop or window installation
• Dimensions: 4 3/16"L x 3 7/8"W x 2"D
• Operating range: 32° - 158°F (0° - 70°C)

1-Watt Transmitter - External Antenna

Complete coverage for most large buildings or small campuses

Transmitter Specifications
• 1 Watt maximum transmission (at transmitter)
• 72-76 MHz frequency range
• 16 channels available (pre-programmed prior to shipping)
• Daylight saving time bypass switch
• Time zone adjustment switch - pre-programmed prior to shipping
• LCD display for time, date, and signal verification
• Cabling: 100' between transmitter and antenna
• FCC part 90 Accepted
• IC RSS-119 Accepted
• Dimensions: 16”L x 1-7/8” H x 12”D
• Weight: 9lbs
• Power Supply:
– Input: 120VAC, 50/60 Hz, 0.4 Amp
– Output: 9 VDC, 2.0 Amp (6ft cord)
• Operating Range: 32°- 158°F (0° - 70°C)

Ground Plane Antenna:
• Dimensions: 29.4"H x 41.5"W
• Lightning Protection: Direct Ground

GPS Receiver
• Included with Transmitter package
• 16' cable attached (50, 100, and 200 foot extension available for additional fee)
• Mounting bracket and hardware included for rooftop or window installation
• Dimensions: 2 1/2”W x 3/4”H
• Weight: 0.75 lb.
• Operating range: -32°- 158°F (-36° - 70°C)

Item #

14000-E*

Description

1-Watt Transmitter – External Antenna

* Requires selection of antenna mounting kit – Pole/Wall Mountable (item #ANT-P1) or Non-Penetrating Mast (item #ANT-NP1)

1-Watt Transmitter - Internal Antenna

Transmitter Specifications
• 1 Watt maximum transmission
• 72 Mhz frequency
• 16 selectable channels
• Daylight saving time bypass switch
• Time zone adjustment switch
• LCD display shows time, date and signal verification
• Dimensions: 17"L x 1 7/8"W x 12"D
• Antenna: 46"
• Power supply:
- Input: 120 VAC, 50/60 Hz, 0.4 Amp
- Output: 9 VDC, 1.5 Amp (6 ft. cord)
• Operating range: 32° - 158°F (0° - 70°C)

GPS Receiver Specifications
•Included with the Primary Transmitter
•16’ cable (50-, 100-, 150-, and 200-foot extensions available)
•Mounting bracket and hardware included for rooftop or window installation
• Dimensions: 2 1/2”W x 3/4”H
• Weight: 0.75 lb.
• Operating range: -32°- 158°F (-36° - 70°C)

Receiver Switch Specifications
• Included with Satellite Transmitter
• 5' RS232 cable connects Receiver Switch to the Satellite Transmitter
• Dimensions: 5 3/4"L x 4 1/4"W x 1 1/4"D
• Antenna: 11 1/2"L
• Power supply:
- Input: 120 Volt AC 50/60 Hz 0.4 Amp
- Output: 9 Volt DC 1.5 Amp (6 ft. cord)
• Operating range: 32° - 158°F (0° - 70°C)

Item #

14000

14143

14144

14006

Description

Primary Transmitter (Internal Antenna) with GPS Receiver Sattellite Transmitter Package

Primary Transmitter (Internal Antenna) Package (includes Transmitter, GPS Receiver, Rack, and UPS)

Satellite Transmitter Package (includes Transmitter, Receiver Switch, Rack, and UPS)

Satellite Transmitter with Receiver Switch